Home > News > Mingxue AC110V LED Tape Light

Mingxue AC110V LED Tape Light

Ac110V Led Tape Light high Voltage led strip, the composition of the material: type 3528, 5050 LED lamp beads, FPC flexible circuit boards, resistors, solder paste, silicone plugs, plastic casing, wires and so on. High-pressure light bar length: up to 100 meters, the unit can be cut every meter.
AC110V LED Tape Light AC110V LED Tape Light
Easy to install.

5050 AC110V LED Tape Light high-voltage lights
5050 AC110V LED Tape Light high-voltage lights

Alternatively neon tubes.


1. Adopt very soft PCB board as a substrate, can be bent and fixed to the convex surface;
2. Products suitable for installation in narrow space inside;
3. AC110V LED Tape Light is for Each one meter a unit can arbitrarily cut off along the tangent above, without damaging other parts of the existing products of 50 meters per roll, you need any length can be customized.
4. With low power consumption, generate less heat, no glare, impact resistance and other characteristics. 110-volt power supply.

AC110V LED Tape Light Use: bars, hotels, hostels, decorative lighting, background lighting.

AC110V LED Tape Light

Installation ways:

AC110V LED Tape Light of Bandwidth four-wire light about 22mm, a thickness of about 8mm, weight about 0.25kg / m (4 meter by Kg)
AC110V LED Tape Light four-wire lights with a total of four wire, three rows of lights (note instead of four rows of lights Oh ~ ~), each row of one meter 24 lights, 24 * 3 = 72. Because each lamp beads power is 0.05W, the power lights with 72 bead is: 72 * 0.05 = 3.6W.

Mingxue Optoelectronics Co.,Ltd. has apply the I S O 9 0 0 1: 2 0 0 8 international quality management system certificate, For AC110V LED Tape Light, Mingxue apply the CE, RoHS and SAA certificate for our led lighting product.

AC110V LED Tape Light

AC110V LED Tape Light

Share to: